System
- 16bit CPU V55PI
- CAN-controller 82527
- real-time clock
- 128 k RAM
- 128 k EPROM (firmware)
- 256 k flash EPROM (user program, image
and text memory)
- gold-cap for buffering the RAM and the
real-time clock
- keyboard illumination (night design)
- voltage supply 8 V up to 32 V DC
(nominal voltage 12 V and 24 V)
- load-dump-protection
- temperature sensors for display and
output
drivers (autom. contrast control of the
display)
- 1x LED for logic voltage (3-color)
- 1x LED for operating voltage (3-color)
- 1x LED for diagnostics (3-color)
- 1x LED for CAN-BUS (3-color) |
Inputs
- 8x inputs digital 12/24 V
with selectable logic level
(plus-switching/ground-switching)
- 8x inputs digital 12/24 V
can be used as keyboard matrix for
connecting up to 64 keys
- 4x inputs analog 0 to 10 V,
resolution: 10 bit, with protective
circuit
(can be used as digital inputs)
- 1x fast counting input up to 60 kHz
Outputs
- 8x outputs digital 12/24 V 1.5 A,
shortcircuit-
proof, overload-proof, backreadable
can be used as keyboard matrix for
connecting up to 64 keys
- 8x outputs digital 12/24 V 1.5 A,
shortcircuit-
proof, overload-proof, backreadable
- 4x reference voltage for analog inputs
(4 V)
Interfaces
- 1x RS 232 (1x9-pole sub-D-jack)
connection
of serial printer or bar-code reader
possible. |
-1x RS 232 / RS 485 (BUSin
and BUSout)
(2x9-pole sub-D-jack)
- 1x CAN-BUS connection (CANin and
CANout ) (2x9-pole sub-D-plug)
- 1x hand-wheel incremental encoder
interface with integrated power supply
5 V/50 mA
- 1x PC-card (optional via RS 485)
Optionally obtainable as a separate unit
called „LED-interface" consisting of:
-16x LEDs yellow,
for each switching output, optional
- 16x LEDs green,
for each switching input, optional
- 16x LEDs red,
for fault recognition, optional
Dimensions
- outside contour mounting frame:
approx. 175 mm x 170 mm
- total mounting depth: approx. 90 mm
- frame thickness: approx. 8 mm
- display area: approx. 108 mm x 58 mm |
